Products
Intercom Entry Systems
100 Series
Model 103
Intercom Entry Systems
100 Series
Model 103
| Model 103 Entry System with Stealth Camera and Keypad |
Overview
• Solid brass (1/4”) faceplate for phone systems and intercoms• Model 103 includes illuminated keypad and controller for 2 gates
• Includes 3.6 mm camera on adjustablebracket (15 deg vertical adjustment)
• Face plate dimensions: 6.375” x 4.375” (h w)
• Back box dimensions: 5.875” x 3.75” x 4” (h w d)
Intercom
MODEL 103 Includes bracket for Panasonic KX-T30865 door boxMODEL 103-CR - Crestron version. Includes C2N-IIF.
MODEL 103-PAN - Compatible with Panasonic KSU’s. Includes speaker microphone, and circuit board.
MODEL 103-TES - Telephone Entry System (TES) creates a communication link between the front door and
every telephone in the house. Special telephones are not required. Includes relay for gate control. More Details
MODEL 103-VIK - High performance version using Viking components. System uses “half-duplex” communication,
allowing for high speaker and microphone volume. More Details
OTHER INTERCOM OPTIONS
MODEL 103-ELN - Compatible with Elan. Includes COM2 door station model DSF3.
MODEL 103-MIT - Compatible with Mitel 3000 telephone systems. Includes speaker, mic and circuit board from
Mitel doorbox.
MODEL 103-NEC - Compatible with NEC. Includes NEC door station model 922450
MODEL 103-OnQ - Compatible with OnQ Cat 5 intercom systems. includes speaker, microphone, and circuit
board from OnQ F7596.
MODEL 103-SONY - Compatible with Sony Homeshare HD intercom system. Includes outdoor treated 8 ohm
speaker.
MODEL 103-45 Ohm -Compatible with Valcom, M&S, and any intercom using 45 ohm speakers. Includes outdoor
treated 45 ohm speaker.
Keypad
| Keypad Type Controller Cable requirements (for Keypad only) No. of Codes No. of Relays Illumination Power Supply Other Features |
5 button keypad Uses Essex controller CM-265 (remote-mounted on101 103 201 203 502) For models with remote-mounted controller (101 103 201 203 502) 22 gauge 12 conductor (recommended) or 2 Cat 5 6 ( 5 plus master code) 2 Turns on when 1st button is pressed 16.5 VAC 40 VA Will operate on 12 - 24 volts, AC or DC Built-in rectifier supplies DC power from AC input source “CCTV” option can trigger a relay for 10 seconds upon any button press |
Camera
High Performance B&W Camera Model 5401
| Signal Pick-up Device Lens Minimum Illumination Field of View Resolution S/N Ratio Back Light Comp Temperature Range Voltage Power Consumption |
NTSC 1/3” Sharp CCD 3.8 mm less than 0.05 lux 90 degrees 500 lines more than 48 dB Auto -10 - 50 degrees C 12 vdc 120 ma |
High Performance Color Camera Model 6401
| Signal Pick-up Device Lens Minimum Illumination Field of View Resolution S/N Ratio Back Light Comp Temperature Range Voltage Power Consumption |
NTSC 1/3” Color Sharp CCD 3.8 mm less than 0.4 lux 90 degrees 380 lines more than 48 dB Auto -10 - 50 degrees C 12 vdc 120 ma |
Finishes
Standard finishes: polished brass, oil rubbed bronze, verdis, black powdercoat, pewter, light antique brass,polished chrome, and brushed chrome.
Optional finishes: pewter, satin nickle, stainless steel
|
|
|
|
|
|
|
|
|
|
Manuals
Prewire diagramPrintable Specification
Hi-Res Image
Manual #110 101, 103, 201, 301, 302 Pansonic KX-T30865 + Essex CM-265
Manual #111 101-PAN 103, 201, 203, 301, 302 (Pan compatable + CM-265)
Manual #112 101-TES 103, 201, 203, 301, 302 (TES compatable + CM-265)
Manual #113 101-VIK, 103, 201, 301, 302 (Viking E-10 w/ C-2000A + CM-265)
Manual #114 101-VIK, 103, 201, 301, 302 (Viking E-10 w/ PAN-1 + CM-265)
Manual #115 101-VIK, 103, 201, 301, 302 (Vik W-1000 w/ C-1000B + CM-265)










