Model 201

Products

Intercom Entry Systems

200 Series

Model 201

Model 201 Entry System with Keypad and Adjustable Camera

Overview

• Solid brass (1/4”) faceplate for phone systems and intercoms
• Includes 3.6 mm camera on adjustable bracket (15 deg horizontal adjustment)
• Model 201 includes illuminated keypad and controller for 2 gates
• Face plate dimensions: 7.5” x 4.4” (h w)
• Back box dimensions: 7” x 3.75” x 4.25” (h w d)

Intercom

MODEL 201 Includes bracket for Panasonic KX-T30865 door box
MODEL 201-CR - Crestron version. Includes C2N-IIF.
MODEL 201-PAN - Compatible with Panasonic KSU’s. Includes speaker microphone, and circuit board.
MODEL 201-TES - Telephone Entry System (TES) creates a communication link between the front door and
every telephone in the house. Special telephones are not required. Includes relay for gate control. More Details
MODEL 201-VIK - High performance version using Viking components. System uses “half-duplex” communication,
allowing for high speaker and microphone volume. More Details

OTHER INTERCOM OPTIONS
MODEL 201-ELN - Compatible with Elan. Includes COM2 door station model DSF3.
MODEL 201-MIT - Compatible with Mitel 3000 telephone systems. Includes speaker, mic and circuit board from
Mitel doorbox.
MODEL 201-NEC - Compatible with NEC. Includes NEC door station model 922450
MODEL 201-OnQ - Compatible with OnQ Cat 5 intercom systems. includes speaker, microphone, and circuit
board from OnQ F7596.
MODEL 201-SONY - Compatible with Sony Homeshare HD intercom system. Includes outdoor treated 8 ohm
speaker.
MODEL 201-45 Ohm -Compatible with Valcom, M&S, and any intercom using 45 ohm speakers. Includes outdoor
treated 45 ohm speaker.

Keypad

Keypad Type
Controller
Cable requirements
(for Keypad only)
No. of Codes
No. of Relays
Illumination
Power Supply
Other Features

5 button keypad
Uses Essex controller CM-265 (remote-mounted on101 103 201 203 502)
For models with remote-mounted controller (101 103 201 203 502)
22 gauge 12 conductor (recommended) or 2 Cat 5
6 ( 5 plus master code)
2
Turns on when 1st button is pressed
16.5 VAC 40 VA
Will operate on 12 - 24 volts, AC or DC
Built-in rectifier supplies DC power from AC input source
“CCTV” option can trigger a relay for 10 seconds upon any button press

Camera

High Performance B&W Camera

Signal
Pick-up Device
Lens
Illumination
Field of View
Resolution
S/N Ratio
Back Light Comp
Temperature Range
Voltage
Power Consumption

NTSC
1/3” B&W CCD
3.6 mm
0.02 lux
72 degrees
420 lines
more than 46 dB
Auto
14 - 122 degrees F
12 vdc
100 ma

High Performance Color Day-Night Camera SCM510HD-1

Signal
Pick-up Device
Lens
Minimum Illumination
Field of View
Resolution
S/N Ratio
Back Light Comp
Temperature Range
Voltage
Power Consumption

NTSC
1/3” Color Sony ExView CCD 410K
3.6 mm
0.005 lux @ F 1.2
115 degrees
560 lines
more than 48 dB
Auto
-10 - 50 degrees C
12 vdc
100 ma

Finishes

Standard finishes: polished brass, oil rubbed bronze, verdis, black powdercoat, pewter, light antique brass,
polished chrome, and brushed chrome.

Optional finishes: pewter, satin nickle, stainless steel