Model 404

Products

Intercom Entry Systems

400 Series

Model 404

Model 404 Entry System with IR LEDs

Overview

Solid brass (1/4”) faceplate for phone systems and intercoms
IR LED illumination for night viewing
Includes 3.6 mm camera on adjustable bracket (25 deg left or right adjustment)
Specify keypad type desired:
- Serial ASCII output 404-A
- Output for C2N-IIF 404-CR
- Stand-alone 12 button 404-S12
- 26 Bit Wiegand output 404-W
Face plate dimensions: 8.125” x 5.125” (h w)
Back box dimensions: 7.25” x 4.25” x 4.25” (h w d)

EXAMPLE PART NUMBER:

404-W-VIK-PB
Model 404 with Wiegand keypad, and Viking intercom, in polished brass finish

MODEL 404-X Includes bracket for Panasonic KX-T30865 door unit
MODEL 404-X-CR - Crestron version. Includes C2N-IIF.
MODEL 404-X-PAN - Compatible with Panasonic KSU’s. Includes speaker microphone, and circuit board.
MODEL 404-X-TES - Telephone Entry System (TES) creates a communication link between the front door and every telephone in the house. Special telephones are not required. Includes relay for gate control. More Details
MODEL 404-X-VIK - High performance version using Viking components. More Details

NOTE: The “X” in the part numbers above is to specify the keypad type. See "Keypad" tab

OTHER INTERCOM OPTIONS
MODEL 404-X-ELN - Compatible with Elan. Includes COM2 door station model DSF3. Option: model DSC3 with balun module
MODEL 404-X-MIT - Compatible with Mitel 3000 telephone systems. Includes speaker, mic and circuit board from Mitel doorbox.
MODEL 404-X-NEC - Compatible with NEC. Includes NEC door station model 922450
MODEL 404-X-OnQ - Compatible with OnQ Cat 5 intercom systems. includes speaker, microphone, and circuit board from OnQ F7596.
MODEL 404-X-SONY - Compatible with Sony Homeshare HD intercom system. Includes outdoor treated 8 ohm speaker.
MODEL 404-X-45 Ohm -Compatible with Valcom, M&S, and any intercom using 45 ohm speakers. Includes outdoor treated 45 ohm speaker.

Keypad

ASCII Format: Selectable baud rate, parity, and mode.
Crestron Format: Compatible with Crestron intercom interface (C2N-IIF)
Stand-Alone 12 Button: 500 codes, 1 relay in keypad, 2 additional relays can be added.
Wiegand Format: 26 bit Wiegand output.

HOLO P/N	Format	No. of Users	No. of Relays	Buttons	Pwr Supply	Illumination	Essex P/N
A	ASCII	Depends on controller type and features	Depends on controller type and features	12	Powered by controller	Illumination can be on all of the time. Must be configured at keypad set-up	K1-26I
CR	For Crestron C2N-IIF	Depends on set-up of Crestron system	Depends on set-up of Crestron system	12	Powered by C2N-IIF	Programmable: ON with button press ON all of the time OFF all of the time	KP-26TI
S12	Stand-alone no controller required	500	1 Plus 2 grounding outputs -external relays required	12	12 VDC 1.25 A supplied	Illumination can be on all of the time. Must be configured at keypad set-up	SKE-26I
W	26 Bit Wiegand	Depends on controller type and features	Depends on controller type and features	12	Powered by controller	Cut jumper wire - turns illumination on all of the time	KTP-102LI

Camera

High Performance Color Day-Night Camera SCM510HD-2

Signal
Pick-up Device
Lens
Minimum Illumination
Field of View
Resolution
S/N Ratio
Back Light Comp
Temperature Range
Voltage
Power Consumption

NTSC
1/3” Color Sony ExView CCD 410K
3.6 mm
0.005 lux @ F 1.2
115 degrees
560 lines
more than 48 dB
Auto
-10 - 50 degrees C
12 vdc
100 ma

Finishes

Standard Finishes: Polished brass, Oil Rubbed Bronze, Black Powdercoat, Light Antique Brass, and Brushed Chrome.

Optional finish: Stainless Steel

Model 404 is stocked only in raw brass. Please allow about 2 weeks to have your order finished. All finishes are available.

Polished Brass