Model 410

Products

Intercom Entry Systems

400 Series

Model 410

Model 410 Euro-Style Entry System with a Selection of Keypad Types

Overview

Solid brass (1/4”) faceplate for phone systems and intercoms
Specify keypad type desired:
- Serial ASCII output 410-A
- Output for C2N-IIF 410-CR
- Stand-alone 12 button 410-S12
- 26 Bit Wiegand output 410-W
Face plate dimensions: 8.125” x 5.125” (h w)
Back box dimensions: 7.25” x 4.25” x 4.25” (h w d)

EXAMPLE PART NUMBER:

410-S12-CR-PB
Model 410 with stand-alone keypad , and Crestron intercom, in polished brass finish

MODEL 410-X Includes bracket for Panasonic KX-T30865 door unit
MODEL 410-X-CR - Crestron version. Includes C2N-IIF.
MODEL 410-X-PAN - Compatible with Panasonic KSU’s. Includes speaker microphone, and circuit board.
MODEL 410-X-TES - Telephone Entry System (TES) creates a communication link between the front door and every telephone in the house. Special telephones are not required. Includes relay for gate control. More Details
MODEL 410-X-VIK - High performance version using Viking components. More Details

NOTE: The “X” in the part numbers above is to specify the keypad type. See "Keypad" tab

OTHER INTERCOM OPTIONS
MODEL 410-X-ELN - Compatible with Elan. Includes COM2 door station model DSF3. Option: model DSC3 with balun module
MODEL 410-X-MIT - Compatible with Mitel 3000 telephone systems. Includes speaker, mic and circuit board from Mitel doorbox.
MODEL 410-X-NEC - Compatible with NEC. Includes NEC door station model 922450
MODEL 410-X-OnQ - Compatible with OnQ Cat 5 intercom systems. includes speaker, microphone, and circuit board from OnQ F7596.
MODEL 410-X-SONY - Compatible with Sony Homeshare HD intercom system. Includes outdoor treated 8 ohm speaker.
MODEL 410-X-45 Ohm -Compatible with Valcom, M&S, and any intercom using 45 ohm speakers. Includes outdoor treated 45 ohm speaker.

Keypad

ASCII Format: Selectable baud rate, parity, and mode.
Crestron Format: Compatible with Crestron intercom interface (C2N-IIF)
Stand-Alone 12 Button: 500 codes, 1 relay in keypad, 2 additional relays can be added.
Wiegand Format: 26 bit Wiegand output.

HOLO P/N	Format	No. of Users	No. of Relays	Buttons	Pwr Supply	Illumination	Essex P/N
A	ASCII	Depends on controller type and features	Depends on controller type and features	12	Powered by controller	Illumination can be on all of the time. Must be configured at keypad set-up	K1-26I
CR	For Crestron C2N-IIF	Depends on set-up of Crestron system	Depends on set-up of Crestron system	12	Powered by C2N-IIF	Programmable: ON with button press ON all of the time OFF all of the time	KP-26TI
S12	Stand-alone no controller required	500	1 Plus 2 grounding outputs -external relays required	12	12 VDC 1.25 A supplied	Illumination can be on all of the time. Must be configured at keypad set-up	SKE-26I
W	26 Bit Wiegand	Depends on controller type and features	Depends on controller type and features	12	Powered by controller	Cut jumper wire - turns illumination on all of the time	KTP-102LI

Finishes

Standard finishes: light oil rubbbed bronze, satin brass, brushed chrome, oil rubbed bronze, and black powdercoat.

Optional finishes: pewter, satin nickle, stainless steel

Model 410 is stocked only in raw brass. Please allow about 2 weeks to have your order finished. All finishes are available.

Oil
Rubbed Bronze