Model 602

Products

Intercom Entry Systems

600 Series

Model 602

Model 602 Advanced Entry System with Two Intercom Systems - Pole Mount

Overview

Advanced Entry System with Crestron Intercom and Telephone Intercom
Features of Model 602:
- Intercoms for Crestron and Telephone
- IR LED illumination for night viewing of Hi Res Color Camera (Sony ExView)
- “Draw bridge” hinges hold unit in horizontal position for easy service
- Integrated 12 vDC power supply (requires only one power supply
- Tamper switch output can be connected to alarm system
- Auxiliary bell contact provided for automation system or camera / DVR
- Illuminated Essex piezo bell button
- Illuminated keypad
- Components are mounted to sub-chassis which is inserted into rough-in box at time of installation
Specify keypad type desired:
- Serial ASCII output 602-A
- Output for C2N-IIF 602-CR
- Stand-alone 12 Button 602-S12
- 26 Bit Wiegand output 602-W

Box dimensions 8.25” x 5.75” x 7.5” (h w d)

EXAMPLE PART NUMBER:

602-S12-CR/VIK(E10)-ORB
Model 602 with "stand-alone" keypad, with Crestron and Viking intercom (E-10), in brushed aluminum finish. The "E-10" Viking listed here is for integration to a Panasonic KSU (using PAN-1) or to POTS (using C-2000B).

Intercom 1

Intercom 1:

Crestron Intercom
Includes C2N-IIF with speaker and mic

Intercom 2

OPTION 1

MODEL 602-X-CR/VIK (E-10)*
Includes C2N-IIF (see Intercom 1)
Includes Viking E-10 (half duplex intercom module)
E-10 can be used with PAN-1 for Panasonic KSUs, or C-2000A for other KSUs
For Panasonic use PAN-1
For other KSUs or POTS use C-2000A (for 1 to 4 entrances)

OPTION 2

MODEL 602-X-CR/VIK (W-1000)*
Includes C2N-IIF (see Intercom 1)
Includes Viking W-1000 (half duplex intercom module)
W-1000 can be used with KSUs or POTS (1 -2 entrances)
For KSUs or POTS use C-1000B

Click here to view summary of Viking options

*NOTE: The “X” in the part numbers above are for keypad specification.

Keypad

ASCII Format: Selectable baud rate, parity, and mode.
Crestron Format: Compatible with Crestron intercom interface (C2N-IIF)
Stand-Alone 12 Button: 500 codes, 1 relay in keypad, 2 additional relays can be added.
Wiegand Format: 26 bit Wiegand output.

HOLO P/N	Format	No. of Users	No. of Relays	Buttons	Pwr Supply	Illumination	Essex P/N
A	ASCII	Depends on controller type and features	Depends on controller type and features	12	Powered by controller	Illumination can be on all of the time. Must be configured at keypad set-up	K1-26I
CR	For Crestron C2N-IIF	Depends on set-up of Crestron system	Depends on set-up of Crestron system	12	Powered by C2N-IIF	Programmable: ON with button press ON all of the time OFF all of the time	KP-26TI
S12	Stand-alone no controller required	500	1 Plus 2 grounding outputs -external relays required	12	12 VDC 1.25 A supplied	Illumination can be on all of the time. Must be configured at keypad set-up	SKE-26I
W	26 Bit Wiegand	Depends on controller type and features	Depends on controller type and features	12	Powered by controller	Cut jumper wireturns illumination on all of the time	KTP-102LI